The Lunar will automatically detect if there is any water on the two buttons on top of the scale. If your scale displays '_H2O' with a '_' on the left side, it means that water is resting on top of the Power Button. If it displays 'H2O_' with the '_' is on the right side, it means there is water on top of the Tare Button. Accordingly, if your scale displays '_H2O_', it means that there is water on top of both the power and the tare button.
If you feel that water may be on the inside of the scale, please follow the instructions below:
1. Please make sure the Lunar surface clean and dry.
2. Put the Lunar off to the side to dry for about 24 hours.
Upon heavy exposure to water, the Lunar will flash the H2O message repeatedly. If ignored, it will shut itself off as a precaution and a signal for the user to let the scale dry for at least 24 hours. The Lunar will be able to turn on 10 minutes later but will most likely shut itself off again.
If you find that your scale is dry inside and out, steam from an espresso drip tray may be triggering the H2O message. We have released the Lunar Base as an accessory to help shops with shallow drip trays who might be getting the H2O code more often than others. To buy this accessory, follow this link.
If you are experiencing the H2O message when it has not been near water for at least 24 hours, it could be due to damage. It is common, especially in a busy cafe, for the scale to be dropped, which can bend the shell in a way that puts weight on the buttons. If you believe this to be the case, please contact our support team at firstname.lastname@example.org
In the video below, our co-founder Rex Tseng demonstrates the H2O message.
Video shot by our friend Frans Goddijn